Do You Know When It’s Time to Change Your Car’s Hose Clamps? Watch for These 3 Warning Signs

Large hose clamps are used to keep the hoses in your car secure and stable. Though they’re available in many different sizes and types of materials, they will eventually need to be replaced. Recognizing the signs that it’s time to switch out a worn hose clamp can be tough, but it can make the difference between keeping your car on the road or sending it to the mechanic again and again. Here are a few signs to watch for.

Your Radiator Hose is Leaking

Large hose clamps help hold your radiator hose in place. As they wear down, the seams in the hose can start leaking, leaving you with an overheating and underperforming engine. If you’ve noticed that your engine is running hotter than normal or feel that something is off when you accelerate, check the hose clamps. It may be that one clamp came loose or broke and just needs to be replaced. Keep in mind, the sooner you replace it, the better. Otherwise, you might do damage to the engine.

Your Radiator Hose is SwollenRead More

Great Inventions The Hose Clamp

Constant tension hose clamps

Were you aware that the hose clamp was invented by a former Royal Navy Commander? Lumley Robinson invented this clamp in 1921, and it continues to be used for a variety of purposes, such as aviation clamps. In general, however, hose clamps are used for hoses that can handle moderate pressures. This includes automative and household applications.

It’s important to note that these clamps are available in different materials and sizes. This is necessary because hose clamps are designed to provide even pressure, without any gaps, on all sides of the hose. Furthermore, the right size hose clamp needs to be used at all times, and should be composed of only quality material. When these measures aren’t in place, the hose’s seal may leak gas, liquid, or any other type of substance that may be passing through the hose.

Hose clamps are also referred to as hose clips. This device is used to attach and seal a hose to a fitting, which includes barbs or nipples. The spring clamp is 1 of the simples types of hose clamps. It consists of a strip of metal shaped like a cylindrical spring and has a number of protrusions. In addition to spring clamps, there are other types of hose clamps, such as worm gear and wire clamps.

Aviation clamps, like other types of hose clamps, are available in a variety of sizes. As a result, they can accommodate the fastening needs for any sized hose.

It’s interesting to note that these clamps are often used to replace duct tape. They can also be used as heavy-duty zip ties, which can be effective and convenient in many situations.

As aforementioned, typical and effective uses for hose clamps include using them to secure hoses in automative systems. They are also used to clamp household plumbing system lines.

When hoses become stuck, they shouldn’t be removed by cutting or slitting them. This is because the barb can become scratched, and they will leak as a result. A good seal is ensured when barbs are free of nicks and scratches as well as contaminants.

Thanks to the innovative thinking of Royal Navy Commander, Lumley Robinson, the hose clamp continues to be used today for a variety of vital purposes.

What to Know About Installing Heavy Duty Hose Clamps

Silicone hose clamps

There is a leak under the sink. If you are the do-it-yourself home plumber type, you leap to the rescue. But, do you really have the tools you need? In many cases, heavy duty hose clamps will be necessary. Here is what you need to know.

While there are many hose clamp types and hose clamp sizes, they all are a specific purpose. Knowing how to measure the diameter of whatever you are clamping is key. The outside diameter of a hose, with the fitting inside, gives the measurement needed to find the correct heavy duty hose clamps for the job. Adjustable hose clamps will have a range of outside diameters they will fit.

Heavy duty hose clamps are designed to tightly seal between the hose and barb. No matter what types of hose clamps you use, it is important that the barb be free of nicks, scratches or contaminates. This ensures the tight fit and good seal to keep the water inside the line.

The Royal Navy Commander Lumley Robinson created the hose clamp in 1921. Since then, the parts, which are u-shaped, have found many uses. Besides plumbing, heavy duty hose clamps are also used in automotive repairs. Automotive hose clamps can be found on radiators and fuel lines.

The next time you are playing plumber, think about the tools needed to complete the job. Measure carefully and keep the area free of debris and nicks. Installing heavy duty hose clamps correctly will keep you leak free! Continue: hoseclampkings.com